Can You Shorten Electric Netting Fence?

Electric netting fences are a popular choice for those seeking a temporary yet effective solution for containing animals. However, there may come a time when the length of the electric netting fence needs to be adjusted. The good news is that it’s indeed possible to shorten an electric netting fence without it falling apart. By simply cutting the fence to the desired length, one can modify it to suit their specific needs. And should the need for a longer fence arise in the future, it can easily be rejoined or extended as required.

Can I Cut Electric Poultry Netting?

Yes, it’s possible to shorten electric poultry netting by cutting it. It’s important to note that cutting the fence won’t cause it to fall apart or lose it’s functionality. Electric netting fences are designed to be adjustable and customizable according to the specific needs and requirements of users.

When shortening the netting, it’s crucial to exercise caution and follow the manufacturers instructions. Before making any cuts, ensure that the power to the fence is turned off to prevent any potential accidents or electric shocks. Once the power is disconnected, carefully measure and mark the desired length that needs to be shortened.

Using appropriate tools such as wire cutters or pliers, cut the netting according to the marked measurement. It’s recommended to wear protective gloves to avoid any injuries during the cutting process. After the netting has been adjusted to the desired length, it can be reconnected using clip connectors or other means specified by the manufacturer.

However, safety precautions should be taken, such as turning off the power before making any cuts. Careful measurement and following the manufacturers instructions are crucial for ensuring the fence remains functional and effective after being adjusted. Consulting experts or manufacturers is recommended to avoid compromising the overall integrity of the netting.

However, the question of whether electric poultry netting can effectively keep chickens within a designated area remains. While these birds have the ability to fly, it’s been found that a short electrified mesh netting can serve as a deterrent to predators and successfully confine chickens, particularly broilers, within the desired boundaries.

Does Electric Poultry Netting Keep Chickens In?

Electric poultry netting is an excellent choice for keeping chickens contained within a designated area. Despite their ability to fly, chickens and turkeys can be effectively confined using a relatively short fence. This type of fencing is especially useful for keeping broilers inside when they need to be fenced tightly.

With the use of electricity, this fencing option not only acts as a physical barrier but also provides an added level of deterrence against predators. The electric current running through the mesh helps to prevent predators from attempting to breach the fence and gain access to the birds.

Supplementary measures such as regular monitoring, predator-proof coop design, and secure nighttime housing should also be implemented to ensure the safety of your birds. Always conduct regular inspections and maintenance of the electrified mesh to ensure it remains in proper working order.

Despite their ability to fly, chickens can be contained using relatively short fences, especially when combined with electrification.

Source: Electric Fence for Chickens, Turkeys, Poultry etc.

There are various methods employed to render an electric fence inactive, ultimately making it ineffective. One common approach involves creating a short circuit by connecting the fence to a metal stake using wire. This repeated short-circuiting prompts the fence’s owner to switch it off, suspecting a fault and unknowingly leaving the fence useless.

Can You Short Out an Electric Fence?

Can you shorten electric netting fences? Absolutely. In fact, individuals with mischievous intent have found ways to render these fences utterly useless by short-circuiting them. One of the methods they employ involves attaching the electric fence wire to a sturdy metallic stake using additional wire. By doing so, they create a direct path for the electrical current to flow, effectively short-circuiting the fence.

These sly troublemakers won’t stop there. They’ll persistently continue to short-circuit the fence until the owner, suspecting a fault or malfunction, eventually decides to turn off the fence altogether. This deliberate action leaves the electric netting fence in a state of ineffectiveness, failing to serve it’s intended purpose of providing security and protection.

Given the ease with which this sabotaging act can be carried out, it becomes crucial for electric fence owners to take proactive measures to safeguard their fences. This may include regularly inspecting the fence for signs of tampering or damage, such as any unauthorized attachments or unusual wire connections. Additionally, ensuring that the electrical system is properly grounded and utilizing quality materials can bolster the fences resilience against attempts at short-circuiting.

In some cases, owners may choose to install additional security measures, such as surveillance cameras or motion sensors, to deter potential offenders from meddling with their electric fences. Education and awareness also play a vital role, as informing the local community about the consequences and legal ramifications of tampering with electric fences can help create a safer environment for everyone.

Types of Electric Fences: This Topic Could Discuss Different Types of Electric Fences, Such as Electric Netting Fences Mentioned in the Article, as Well as Other Types Like Electric Tape Fences or Electric Wire Fences.

Electric fences are commonly used to contain or deter livestock, and there are various types available. One type is electric netting fences, which are mentioned in the article. These fences consist of electrified netting that can be easily moved and are often used for temporary enclosures. Another type is electric tape fences, which consist of wide, electrified polytape that’s highly visible to animals. Electric wire fences, on the other hand, are made up of thin electric wires that can be strung along posts or insulators. Each type of electric fence has it’s own benefits and considerations, and the choice depends on specific needs and preferences.

Erecting an electric fence netting is a simple task that can be done with a few essential considerations. While it’s crucial to ensure that the horizontal live wires don’t touch the ground or come into contact with vegetation, the bottom wire doesn’t carry electric current and is therefore allowed to touch the ground. In the following sections, we will delve into some valuable tips and suggestions that will help you maximize the effectiveness of your electric net.

Can Electric Fence Netting Touch the Ground?

Electric fence netting, also known as electric netting fence, is a popular choice for containing and protecting livestock in various settings. When it comes to setting up your electric fence netting, it’s essential to ensure that the horizontal live wires don’t touch the ground or come into contact with vegetation.

Erecting the netting is a fairly straightforward process. Start by choosing a suitable location for your fence, making sure it’s free from vegetation and debris. Clearing the area of any potential obstacles will minimize the risk of the fence experiencing interference and decrease the chances of damage.

When setting up the electric netting, be mindful of the position of the horizontal live wires. These wires carry the electric charge and are essential for effectively deterring animals from entering or exiting the designated area.

To optimize the performance of your electric fence netting, regularly inspect the fence for any damage or wear. If you notice any areas where the live wires are touching the ground or vegetation, it’s crucial to address the issue promptly. This may involve readjusting or repairing the netting to ensure the wires are kept at a safe distance from potential obstructions.

Setting up your electric net properly is essential for maximizing it’s effectiveness in containing and protecting livestock.

Setting up electric netting for your fencing needs requires some site preparation. Start by carrying the rolls of net and the energizer to the intended fence line. Unroll the net by gripping all the posts and lifting them up together in front of you. Next, unfold the net and properly join two rolls of standard net if necessary. Pay attention to the ends, corners, and curves of the fence to ensure a secure setup. Once everything is in place, check the voltage to make sure it’s functioning properly. Finally, when you’re finished, roll up the net for easy storage and future use.

How Do You Set Up an Electric Netting?

Setting up an electric netting fence involves a few steps to ensure efficient installation. Before starting the process, it’s important to prepare the site where the fence will be installed. Clear any debris or obstacles that may hinder the establishment of the fence line.

Once the site is prepared, you can begin by carrying the roll(s) of net and energizer to the proposed fence line. It’s advisable to have at least two people for this task, as the rolls of netting can be quite heavy.

Next, unroll the net by gripping all the posts as a group and lifting them up in front of you. This will allow you to easily unroll the netting along the fence line. Make sure the netting is aligned properly and not tangled.

After unrolling the net, you can proceed to unfold it. Carefully spread the netting on the ground, ensuring that it lies flat and the mesh isn’t twisted or entangled. Take your time during this step to ensure a smooth and even installation.

In situations where two rolls of standard netting need to be joined together, make sure to do so securely. Use connector clips or other appropriate tools to connect the two rolls.

When reaching the ends, corners, and curved sections of the fence line, extra attention must be paid to ensure proper installation. It’s important to maintain consistent tension throughout the netting to allow for a reliable and effective barrier.

Finally, before wrapping up the installation process, it’s crucial to check the voltage of the energizer. This step will ensure that the electric netting fence is functioning properly and providing a sufficient deterrent to keep animals out.

Once the installation is complete, you can roll up the netting for future use. Properly storing the netting will help preserve it’s lifespan and ensure easy deployment for future installations.

Choosing the Right Energizer for Your Electric Netting Fence

When it comes to electric netting fences, choosing the right energizer is crucial for ensuring the effectiveness and reliability of the fence. The energizer is the device that supplies the electric current to the fence, so it’s important to select one that matches the specific needs of your fence.

There are a few factors to consider when choosing an energizer. First, you need to determine the power source that will be used. Energizers can be powered by mains electricity, battery, or a combination of both. The power source will depend on the availability of electricity in your location and your preference for portability.

Next, you should consider the length of your electric netting fence and the type of animals you’re trying to contain or exclude. The energizer you choose should have sufficient power output to electrify the entire length of the fence and deliver a shock that’s appropriate for the target animals. Different animals have different thresholds for electric shocks, so it’s important to choose an energizer that meets your specific requirements.

Additionally, you should consider the durability and reliability of the energizer. Electric netting fences are often exposed to various weather conditions, so the energizer should be designed to withstand these elements. Look for energizers that are weatherproof and have a good track record of reliability.

Lastly, consider any additional features or accessories that you may need. Some energizers come with built-in lightning protection, remote control capabilities, or alarms to alert you of any faults in the fence.

Overall, choosing the right energizer for your electric netting fence involves considering the power source, fence length, target animals, durability, and any additional features you may require. Taking these factors into account will help ensure that your electric netting fence is effective and reliable in containing or excluding animals as intended.

Watch this video on YouTube:

However, when the ground is wet, it can interfere with the flow of electricity, potentially reducing the effectiveness of the electric fence. Wet ground can act as a conductor, allowing the charge to disperse, instead of flowing through the animal and completing the circuit. This can result in a weaker shock, or even no shock at all, which compromises the fence’s ability to keep animals contained and safe.

Does Wet Ground Affect Electric Fence?

When the ground is wet, it can create a more conductive environment, allowing the charge to easily flow through the ground and back to the grounding source. This can enhance the effectiveness of the electric fence, as more of the charge will be able to reach the animal, resulting in a stronger deterrent.

However, there can also be some drawbacks to having a wet ground when it comes to electric fences. Excessive rain or snow can cause the ground to become saturated, leading to pooling water or mud.

Another factor to consider is the insulation of the fence components. If the insulation becomes compromised due to wet conditions, such as waterlogged wires or damaged insulators, the electric current may not be able to flow properly and can potentially cause a short circuit. This could lead to a loss of power in the fence, rendering it ineffective.

To prevent these issues, it’s important to regularly inspect and maintain your electric fence, especially during wet weather conditions. Ensure that all components are in good working order and replace any damaged or compromised parts. It may also be necessary to adjust the voltage or increase the number of grounding rods to compensate for the potential loss of power due to wet ground.


By cutting the fence, you can adapt it to your specific needs without worrying about it falling apart. Furthermore, if you decide to extend it’s length in the future, it can be easily rejoined back together. This flexibility allows you to tailor your electric netting fence to the dimensions that best suit your requirements, providing a versatile solution for containing animals or protecting your property.

Scroll to Top