How Strong Is an Electric Fencer Putting Out 2000v

Voltage is a measure of the electrical potential difference between two points, and in the case of electric fences, it indicates the shock intensity that the fence will deliver to an animal or intruder. However, solely relying on voltage to determine the strength of an electric fencer can be deceptive. Other factors, such as joules, amperage, and resistance, play crucial roles in assessing it’s overall power. Considering these factors together offers a more accurate understanding of just how formidable a 2000-volt electric fencer can truly be.

How Many Volts Is a Strong Electric Fence?

When it comes to electric fences, the strength isn’t solely determined by the voltage. While an electric fence energizer may put out a staggering 8,000 volts, the amperage or current it produces is relatively low at around 120 milliamps, which is equivalent to 120-thousandths of an amp. This combination of high voltage and low amperage is what makes an electric fence effective yet safe.

To understand the significance of these values, it’s important to note that amperage is what actually causes harm to living beings. High amperage can be dangerous, leading to severe injuries or even death.

On the other hand, voltage plays a crucial role in ensuring that the electric fence is capable of delivering a shock even through fur or thick skin.

It’s important to note that although 8,000 volts may sound intimidating, the human body has a relatively high resistance to electric shocks. As a result, even if someone were to come into contact with the fence, the low amperage would prevent serious harm. The shock experienced from an electric fence is generally uncomfortable but not life-threatening.

This combination of high voltage and low amperage creates an effective deterrent that’s capable of delivering a shocking but non-lethal zap to potential trespassers.

The Physics of Electric Fences: Exploring How Voltage and Amperage Work Together to Create an Effective and Safe Deterrent.

The strength of an electric fencer is typically measured in voltage, with a 2000v fencer being quite powerful. However, it’s important to understand that voltage alone doesn’t determine the effectiveness of the electric fence.

Electric fences work by delivering a short and high-voltage electric shock to animals, acting as a deterrent. The shock is designed to be uncomfortable and create a strong psychological deterrent, rather than causing harm. This is achieved through a combination of voltage and amperage.

Voltage refers to the electrical potential difference or force behind the shock, while amperage refers to the flow of electrical current. Both factors are crucial in determining the strength of an electric fence.

Although a 2000v fencer sounds powerful, it’s important to consider the amperage as well. Electric fences typically have low amperage, measured in milliamps, which is a safe level that prevents serious harm to animals or humans.

Therefore, while the 2000v electric fencer may seem strong, it’s important to ensure that the amperage is within safe limits to effectively and safely deter animals without causing harm.

When it comes to electric fences, having the right voltage is crucial for ensuring proper livestock containment. In summer, a minimum of 2000 volts is recommended, while 4000 volts is necessary in winter due to the thicker hair coats on animals and the potential lack of a proper ground caused by snow. Maintaining these voltage levels is essential for an effective electric fence system.

Is 2000 Volts Enough for Electric Fence?

Electric fences are an effective and widely used method for containing livestock and keeping unwanted visitors out. One crucial aspect of these fences is the voltage they produce, as it determines their strength and effectiveness. When it comes to electric fencers, a widely accepted rule of thumb suggests that a minimum of 2000 volts is necessary in the summer, while 4000 volts are recommended for the winter season.

Furthermore, the effectiveness of an electric fence depends not only on the voltage but also on it’s design, installation, and maintenance. Proper grounding, adequate wire spacing, and regular inspections are crucial to maximize the fences efficiency. Maintenance tasks such as clearing vegetation and ensuring the proper functioning of the energizer are equally important to guarantee a strong and reliable electric fence.

Proper design, installation, and maintenance play vital roles in ensuring a strong and secure electric fence system to contain livestock effectively.

How to Choose the Right Electric Fence Energizer for Different Livestock and Fencing Needs

  • Understand the needs of your livestock and fencing requirements
  • Consider the types of livestock you’ve and their size
  • Determine the length and type of fencing you’ll be using
  • Calculate the desired power output for your electric fence energizer
  • Research the different energizer options available
  • Choose an energizer that’s suitable for your specific needs
  • Consider additional features such as battery life and warranty
  • Consult with experts or experienced individuals in the field
  • Compare prices and reviews before making a final decision
  • Install and test the electric fence energizer properly
  • Maintain and monitor the electric fence regularly for any issues


It’s crucial to consider other variables such as Joules, pulse duration, and grounding systems to assess the overall power and effectiveness. Therefore, it’s recommended to consult with experts in the field, carefully consider the specific requirements and applications, and ensure compliance with local regulations to make an informed decision when choosing an electric fencer.

Scroll to Top