How to Clean a Licgen Chain Link Fence

A well-maintained and clean licgen chain link fence can greatly enhance the aesthetic appeal and functionality of your property. Whether it’s to remove dirt, grime, or other unsightly substances, knowing how to effectively clean your chain link fence is essential. When it comes to choosing a cleaning solution, opting for a gentle and environmentally friendly option is key. You can use a pressure washer to effortlessly apply the solution or simply grab a scrub brush and get to work. Whichever method you choose, it’s important to allow the cleaning solution to sit on the fence for approximately ten minutes before giving it a thorough rinsing with a hose.

How Do You Remove Mildew and Algae From a Wooden Fence?

Allow the solution to sit – After scrubbing the fence, let the bleach mixture sit on the wood for about 10-15 minutes. This will allow the solution to penetrate the mildew and algae, making it easier to remove.

Rinse with water – Use a garden hose or pressure washer to thoroughly rinse the fence. Make sure to remove all traces of the bleach mixture and any remaining dirt or debris.

Repeat if necessary – If the mildew and algae stains are stubborn and not fully removed, you may need to repeat the process. Simply mix up a new batch of the cleaning solution and go through the same steps.

Apply a protective finish – Once the fence is clean and free of mildew and algae, it’s a good idea to apply a protective finish to prevent future growth. Choose a sealer or stain specifically designed for outdoor wood surfaces and apply according to the manufacturers instructions.

Regular maintenance – To keep your wooden fence looking it’s best, regular maintenance is key. Regularly inspect the fence for signs of mildew or algae growth and clean as needed. Additionally, consider applying a new protective finish every few years to keep the wood protected from the elements.

How to Properly Maintain a Wooden Fence to Prevent Damage and Extend It’s Lifespan

  • Regularly inspect the wooden fence for any signs of damage or wear.
  • Remove any debris, such as leaves or branches, that may accumulate near the fence and cause moisture buildup.
  • Trim any plants or vegetation that are touching or growing against the fence, as they can increase moisture levels and promote rot.
  • Apply a weather-resistant sealant or stain to protect the wood from the elements.
  • Check for any loose boards or nails and repair them promptly to maintain the structural integrity of the fence.
  • Keep sprinklers and other sources of water away from the fence to prevent excessive moisture exposure.
  • Regularly clean the fence using mild soap and water to remove dirt, mold, or mildew.
  • Avoid using harsh chemicals or pressure washers, as they can damage the wood.
  • Consider applying a protective coating or paint to further enhance the fence’s durability.
  • Inspect and repair any damage caused by pests, such as termites or wood-boring insects, to prevent further deterioration.

Watch this video on YouTube:

Gently power washing your fence can effectively remove lichen without causing damage, as long as you use the lowest setting and avoid pointing the spray directly at the wood. Instead, aim the nozzle at a slight angle to wash away the lichen without risking any chipping or cracking.

What Is the Best Way to Remove Lichen From a Fence?

Using a power washer can be an effective way to remove lichen from a fence. However, it’s important to use caution and follow some guidelines to prevent damage to the fence. Start by setting the power washer to it’s lowest setting to ensure a gentle stream of water. Direct the nozzle at a slight angle, rather than pointing it directly at the fence. This will help prevent chipping or cracking of the wood. Take care not to spend too much time in one area, as this can also cause damage.

One option is to mix a solution of equal parts water and vinegar and spray it onto the affected areas. Allow the solution to sit for a few minutes, then scrub the lichen using a stiff brush. Rinse the fence thoroughly with water to remove any remaining vinegar solution. Another method is to create a paste using baking soda and water. Rinse off the baking soda residue with water afterwards.

These products are specifically designed to break down and remove lichen growth. Be sure to read and follow the manufacturers instructions carefully when using these products. Before applying any cleaning solution or product to your fence, it’s always a good idea to test it on a small, inconspicuous area first to ensure it doesn’t cause any damage or discoloration.

Regular maintenance of your chain link fence can also help prevent lichen growth. Keep the fence clean by regularly brushing away any debris or organic matter that may accumulate on the surface. Additionally, consider applying a protective sealant or paint to your fence, as this can create a barrier that makes it more difficult for lichen to take hold.

The Environmental Impact of Using Power Washers or Chemical Cleaners to Remove Lichen From a Fence.

  • The release of harmful chemicals into the environment
  • Contamination of nearby water sources
  • Destruction of natural habitats
  • Disruption of ecosystem balance
  • Potential harm to human health
  • Damage to the structure and integrity of the fence
  • Pollution of surrounding air quality
  • Release of greenhouse gases
  • Impact on wildlife and plant life
  • Long-term damage to soil quality

In addition to white vinegar, another effective option for cleaning a fence is baking soda. By using a homemade solution of 1/2 a cup of vinegar per gallon of water, you can easily remove dirt, grime, and stains from your fence. To further enhance the cleaning process, you can pre-soak the fence with a baking soda solution before applying the vinegar mixture. This combination will leave your fence looking beautifully clean and refreshed.

How Do You Clean a Fence With White Vinegar?

Cleaning a chain link fence can be a daunting task, especially when it’s covered in dirt, grime, and stubborn stains. However, there’s a simple and cost-effective solution to help restore it’s original beauty – white vinegar. This common household ingredient can work wonders when it comes to cleaning various surfaces, including fences.

To make an easy homemade fence cleaning solution, all you need is white vinegar and water. It’s as simple as adding half a cup of vinegar per gallon of water and mixing it well. This solution isn’t only effective in removing dirt and grime but also helps to disinfect the surface.

Before applying the vinegar solution, it’s recommended to pre-soak the fence with baking soda. This powerful ingredient helps to break down tough stains and dirt, making it easier for the vinegar solution to do it’s job. Simply sprinkle baking soda on the fence, focus on the areas with heavy stains, and let it sit for a few minutes before rinsing it off.

Once the pre-soak step is complete, it’s time to apply the vinegar and water mixture. Using a spray bottle or a soft-bristle brush, generously apply the solution to the entire surface of the chain link fence. Allow the mixture to sit for about 15 minutes to allow the vinegars acidity to break down any remaining stains or grime.

After the designated time has passed, it’s essential to thoroughly rinse the fence with water to remove any residue. A pressure washer or a garden hose with high pressure can be used to effectively rinse off the vinegar solution. Make sure to cover all areas, including the corners and crevices, to ensure a thorough clean.

Tips for Cleaning Other Types of Fences With White Vinegar (Wood, Vinyl, Etc.)

If you’re looking to clean a license chain link fence, you may also be interested in cleaning other types of fences. One effective and affordable solution for various fence materials, like wood or vinyl, is using white vinegar. Dilute vinegar with water in a 1:1 ratio and scrub the fence surface using a brush or sponge. This mixture can help remove dirt, grime, and mildew stains. Rinse the fence thoroughly with water after cleaning. However, always test the vinegar solution on a small, inconspicuous area first to ensure it doesn’t cause any damage to the fence material.


This method isn’t only efficient but also takes into consideration the importance of protecting the environment. So, whether you’ve a dirty licgen chain link fence that needs a refresh or simply want to maintain it’s cleanliness, this gentle cleaning technique is the way to go.

Scroll to Top