How to Connect Inground Fence Wire to Transmitter | DIY Guide

Are you looking to install an inground fence for your property? One crucial step in this process is connecting the inground fence wire to the transmitter. This is essential to ensure that the system operates effectively and keeps your pets safe within the designated boundaries. To achieve this, you’ll need to strip the ends of the boundary wire, usually around 1.3 centimeters, and carefully insert them into the boundary wire terminals on the fence transmitter. Once this is done, you can plug the power adapter into the power jack and an electrical socket, and you should see the power light and loop indicator lights come on, indicating that the system is ready for use.

How Do You Install an Invisible Fence Transmitter?

When it comes to installing an invisible fence transmitter, there are a few steps you should follow to ensure proper installation. First, gather all the necessary tools and materials for the job. This may include a shovel, wire cutters, and a transmitter unit. It’s important to have everything you need before beginning the installation process.

Once you’ve everything ready, it’s time to install the transmitter. Choose a location for the transmitter that’s dry and well-ventilated. Make sure it’s away from any metal objects that could interfere with the signal. Mount the transmitter on the wall or another suitable surface, following the manufacturers instructions.

Next, you need to lay out the wire that will form the invisible fence. Start by determining the boundaries you want to establish for your pet. Use the wire cutters to cut the wire to the desired length, making sure to leave some extra for connecting to the transmitter later. Lay the wire along the ground, following the chosen boundaries, and secure it in place with garden staples or other suitable fasteners.

After the wire is laid out, it’s time to bury it. Use a shovel or trenching tool to create a trench along the wires path. The trench should be about 2 to 3 inches deep, deep enough to protect the wire from being damaged by lawnmowers or other equipment. Carefully place the wire in the trench, making sure it’s secure and not exposed.

With the wire securely buried, it’s time to connect it to the transmitter. Strip the insulation off the ends of the wire and connect them to the appropriate terminals on the transmitter. Follow the manufacturers instructions to ensure proper connections. Once the wires are connected, it’s time to test the system. Turn on the transmitter and walk around the boundary to check if the collar receives the signal properly.

Finally, now that the system is set up, it’s important to train your dog to understand the boundaries. Put the collar on your dog and walk them around the boundary, allowing them to hear the audible warning or feel the static correction if they approach too close to the boundary. Use positive reinforcement, such as treats and praises, to reward your dog for staying within the boundary. Consistency and patience are key during the training process.

By following the above steps, you can ensure a successful installation and provide a safe and secure boundary for your pet.

Troubleshooting Common Issues With Invisible Fence Transmitters

Troubleshooting common issues with invisible fence transmitters is crucial for maintaining the effectiveness of your inground fence system. If you encounter any problems, here are a few steps you can take to address them:

1. Check the power supply: Ensure that your transmitter is properly connected to a power source and receiving electricity. A loose or faulty power connection can disrupt the signal and render the fence useless.

2. Inspect the wiring: Examine the wire connections between the transmitter and the boundary loop. Look for any signs of damage or loose connections. Repair or replace any faulty wires to ensure a secure connection.

3. Verify signal strength: Some transmitters have indicator lights to display the signal strength. Check the lights to ensure they’re within the acceptable range. If the signal is weak, consider adjusting the transmitter’s settings or relocating it to a more central position.

4. Check for interference: Electronic devices or certain landscaping features can interfere with the transmitter’s signal. Move the transmitter away from any potential sources of interference like large metal objects or power lines.

5. Test the collar: Occasionally, the issue might lie with the pet’s collar receiver. Check the battery level and ensure it’s properly fitted around your pet’s neck. If necessary, replace the battery or consult the manufacturer for further assistance.

By troubleshooting these common issues, you can ensure that your invisible fence transmitter is functioning optimally, providing a safe and reliable containment system for your pets.

Watch this video on YouTube:

Now that you’ve planned and prepared for the installation of the PetSafe Basic In-Ground Fence, it’s time to move on to the next steps. These include testing the fence, burying the wire, and fitting the collar. Follow the instructions carefully to ensure a successful installation and provide a safe and effective boundary for your pets.

How Do You Install a Petsafe Basic in Ground Fence?

Installing a PetSafe Basic In-Ground Fence requires careful planning and preparation. Before you begin, it’s important to plan out the fence area. This will help you determine the best location for the transmitter and the fence boundaries. Take the time to measure the area and mark the boundaries where you want the fence to be installed.

Make sure you’ve all the necessary materials, including the transmitter, wire, and boundary flags. Read through the instruction manual to familiarize yourself with the installation process and gather all the tools you’ll need.

Testing the fence is an important step to ensure it’s working properly before burying the wire. Place the base unit in a central location within your home and plug it into a power outlet. Follow the instructions in the manual to test the system and make sure the transmitter is functioning correctly.

After testing the system, you can proceed to bury the wire. This involves digging a trench around the perimeter of the fence and placing the wire inside. Make sure to follow the instructions in the manual regarding the depth and placement of the wire. Use a shovel or a trenching tool to dig the trench and carefully place the wire inside, being careful not to damage it.

Once the wire is securely buried, it’s time to fit the collar on your pet. Attach the collar to your pets neck and adjust it to ensure a comfortable fit. Make sure the contact points of the collar are in direct contact with your pets skin. Test the collar by walking around the boundary area with your pet and observe their reaction to the warning and correction signals.

By following these steps, you can successfully install the fence and provide a safe and secure environment for your pet.

When it comes to setting up a wireless fence for your dog, the coverage range is an important factor to consider. With the PetSafe Wireless Pet Containment System, you’ve the flexibility to personalize the coverage area. Whether you need a smaller range of 5 to 90 feet in all directions or a larger range of up to 180 feet across, this portable system has you covered. Plus, with the included Receiver Collar, you can ensure that your furry friend stays safe and within the designated boundaries.

How Far Can You Put a Wireless Fence From a Dog?

The PetSafe Wireless Pet Containment System is a convenient and effective way to keep your pet safe within a designated area. With this system, you’ve the flexibility to customize the coverage according to your needs. You can personalize the range from a minimum of 5 feet to a maximum of 90 feet in all directions from the base unit. This means you can create a large and secure space for your dog to roam freely.

The wireless technology used in this system allows for easy and quick setup. You can have the system up and running in just 1-2 hours, making it a hassle-free solution for pet owners. Whether you’re at home or on vacation, you can easily bring this system along and ensure your pets safety no matter where you go.

The PetSafe Wireless Pet Containment System comes with a receiver collar that’s specially designed for this system. The collar is lightweight and comfortable for your pet to wear. It’s also waterproof, so you don’t have to worry about it getting damaged if your dog decides to take a dip in the pool or play in the rain.

Connecting the inground fence wire to the transmitter is a critical step in setting up the system. A DIY guide will provide you with step-by-step instructions on how to do this properly. It’s essential to follow the guide carefully to ensure that the wire is securely connected and that the system functions effectively.

With it’s customizable coverage and easy setup, you can have peace of mind knowing that your dog is protected, whether you’re at home or away. The included receiver collar is designed for your pets comfort and durability. By following the DIY guide on connecting the inground fence wire to the transmitter, you can ensure a successful installation and a secure environment for your furry friend.

Source: : PetSafe Wireless Pet Fence –


In conclusion, connecting the inground fence wire to the transmitter is a crucial step in setting up a reliable and effective boundary system for your pets. By properly stripping the ends of the boundary wire and inserting them into the designated terminals on the fence transmitter, you can ensure a secure connection. Additionally, plugging in the power adapter and observing the illuminated power and loop indicator lights can provide a reassuring confirmation that the system is functioning correctly. Following these steps and guidelines will enable you to establish a safe and consistent boundary for your beloved pets, offering them the freedom to roam within designated limits while keeping them secure.

Scroll to Top