How to Cut Vinyl Lattice Fencing – A Step-by-Step Guide

Vinyl lattice fencing is a popular choice when it comes to adding privacy, security, and aesthetic appeal to your outdoor space. However, in order to achieve the perfect fit for your specific needs, you may find yourself in the position of needing to cut the vinyl lattice panels. In this step-by-step guide, we will walk you through the necessary steps to cut vinyl lattice fencing safely and accurately, ensuring a seamless and professional-looking result.

Can You Cut Lattice With a Hand Saw?

Place the lattice sheet on the table and secure it with clamps. Measure and mark the desired cut line using a straight edge and a pencil. Make sure to leave some extra length on both sides of the cut line to allow for any corrections or adjustments.

Now, align the blade of the table saw with the marked cut line. Begin the cut by slowly pushing the lattice sheet towards the blade. Make sure to apply even pressure and keep the sheet steady throughout the process. Take your time to ensure a clean and accurate cut.

For smaller or more intricate cuts, a hand saw can be used. Choose a saw with fine teeth and a narrow blade for better control. Take your time and use smooth, steady strokes to prevent the blade from binding or drifting off course.

Remember to always wear appropriate safety gear when working with saws, including safety glasses and gloves. With the right tools and technique, cutting vinyl lattice with a saw can be a straightforward and manageable task.

How to Repair a Cut Lattice Piece That Has Been Damaged During Cutting

  • Inspect the damaged lattice piece carefully to determine the extent of the damage.
  • Gather the necessary tools for the repair, such as a utility knife, sandpaper, glue, and clamps.
  • Clean the damaged area using a soft cloth and mild soap, removing any dirt or debris.
  • Trim any rough edges or splintered sections of the lattice piece with a utility knife.
  • Using sandpaper, gently smooth the edges and surface of the damaged area to ensure a clean finish.
  • Apply a small amount of wood glue to the damaged area using a brush or applicator, spreading it evenly.
  • Press the damaged lattice piece back together firmly, ensuring a tight fit.
  • Secure the repaired section in place using clamps, following the manufacturer’s instructions.
  • Allow the wood glue to dry completely, usually for at least 24 hours or as indicated by the glue packaging.
  • Once dry, remove the clamps and inspect the repair. Sand any excess glue or rough edges if necessary.
  • If desired, stain or paint the repaired lattice piece to match the rest of the lattice structure.
  • Reinstall the lattice piece, making sure it fits securely into it’s original location.

When it comes to cutting vinyl lattice, it’s important to choose the right saw for the job. One option is a vinyl-cutting blade specifically designed for plastic or solid core vinyl lattice. Another possibility is using a reciprocating saw or sawzall with a metal bit. However, it’s crucial to steer clear of high-speed saw bits intended for wood, as they can cause chipping due to the oversized teeth.

What Saw Is Used to Cut Vinyl Lattice?

When it comes to cutting vinyl lattice fencing, choosing the right saw is crucial for achieving clean and precise cuts. One commonly recommended tool for this task is a vinyl-cutting blade. Designed specifically for cutting through plastic materials, such as vinyl, these blades feature smaller teeth and a finer edge. This allows for smoother cuts without the risk of chipping or cracking the lattice.

Another option is to use a reciprocating saw or a sawzall with a metal bit. While these tools are typically used for cutting metal, they can also be effective for cutting through vinyl lattice. When using a reciprocating saw, it’s important to choose a metal bit that’s appropriate for cutting plastic. This will ensure that the teeth aren’t too large and will prevent any potential damage to the lattice.

To ensure clean and straight cuts, it’s recommended to use a guide or a straight edge when cutting vinyl lattice. This will help to maintain a steady and accurate cutting line. Additionally, using clamps to secure the lattice in place can prevent any movement or shifting during the cutting process.

Before cutting the vinyl lattice, it’s important to measure and mark the desired dimensions. This will help to ensure that the cuts are precise and that the pieces of lattice fit together properly. Taking the time to set up and prepare before cutting will ultimately result in a more professional and aesthetically pleasing finished product.

How to Properly Install Vinyl Lattice Fencing

  • Measure and plan the placement of the vinyl lattice fencing.
  • Dig post holes at regular intervals along the desired fence line.
  • Insert the fence posts into the holes and secure them with concrete.
  • Attach the vinyl lattice panels to the fence posts using screws or nails.
  • Ensure that the panels are level and evenly spaced.
  • Trim any excess lattice material to fit the desired height and shape.
  • Secure the lattice panels to the posts using additional screws or brackets.
  • Apply any desired finishing touches, such as post caps or decorative elements.
  • Regularly clean and maintain the vinyl lattice fencing to prolong it’s lifespan.


By following this step-by-step guide, you can confidently tackle the cutting process with ease, ensuring a precise and professional-looking result. Remember to gather the necessary tools and take all necessary safety precautions before starting. With patience and attention to detail, you’ll be able to customize your vinyl lattice panels to perfectly fit your desired dimensions and create a stunning, functional fence for your property. Happy cutting!

Scroll to Top