How to Hang Dog Ear Fence Boards: A Step-by-Step Guide

When it comes to building a dog ear fence, one crucial step is properly hanging the fence boards. This guide will provide you with a step-by-step process to ensure your fence boards are securely and accurately installed. By following these instructions, you’ll learn the proper techniques and tools needed to complete your fence project successfully. So, let's dive in and learn the art of properly hanging dog ear fence boards.

How Do You Hold a Fence Panel in Place?

When it comes to installing a dog ear fence, one of the essential steps is securely holding the fence panel in place. There are a few methods you can use to achieve this. If you prefer using nails, start by drilling six evenly spaced pilot holes down the batten frame on the fence panel. This will ensure that the nails go in straight and will prevent the wood from splitting. Make sure to use galvanized nails as they’re resistant to rust and corrosion. Repeat the same process for the other side of the panel to ensure stability and durability.

Another popular method for holding a fence panel in place is by using screws. This provides a more secure and long-lasting hold compared to nails. To use screws, start by pre-drilling holes in the batten frame of the fence panel. This will prevent the wood from splitting when you insert the screws. Once the pre-drilled holes are ready, use galvanized screws to fasten the panel to the posts. This method allows for easy adjustment and removal of the fence panel if needed in the future.

Watch this video on YouTube:

When it comes to installing a dog ear picket fence, the spacing between the pickets doesn’t have to be precise. In fact, you can make it easier on yourself by only standing on one side of the fence during installation. The normal spacing between pickets is around 2 3/4 inches, with dog ear pickets measuring about 4 5/8 inches.

How Much Space Should There Be Between Dog Ear Pickets?

When it comes to hanging dog ear fence boards, one important factor to consider is the spacing between the pickets. While precise spacing isn’t necessary, you still want to ensure an aesthetically pleasing and functional fence. The normal spacing between dog ear pickets is around 2 3/4 inches. This allows for proper airflow and visibility while maintaining the privacy and security of your fence.

To achieve this spacing, it’s recommended to use a spacer tool or a scrap piece of wood. This tool helps maintain consistent spacing throughout the fence installation process. By placing the spacer tool between each picket, you can easily achieve the desired 2 3/4-inch gap without any guesswork. This will result in a clean and uniform appearance for your fence.

This measurement includes the wider portion at the top, which gives the picket it’s distinctive dog ear shape. Therefore, when calculating the spacing between the pickets, it’s important to take this wider width into account.

During the entire installation process, it’s also important to keep in mind that you only need to stand on one side of the fence. This makes the installation process more convenient and efficient. You can work from one side, securing each picket in place, and easily move along the fence line without the need to constantly switch sides.

This step-by-step guide will enable you to create a durable and visually appealing fence that will enhance the beauty and functionality of your property.

Watch this video on YouTube:

When it comes to attaching fence boards, there are a few basic fastener types to consider. Nails are commonly used and provide a secure hold. Staples offer convenience and are less invasive compared to nails or screws. Screws are versatile and work well for various purposes, such as attaching gate hinges and latches, securing pickets to a metal frame, and fastening rails to metal posts.

What Do You Use to Attach Fence Boards?

When it comes to attaching fence boards, there are various options available depending on your preferences and the type of fence you’re constructing. One of the most common methods is using nails. Nails are widely used in fence construction due to their affordability and ease of use. They’re typically hammered into the boards and provide a strong hold. However, it’s important to choose nails that are specifically designed for outdoor use to ensure durability and resistance to weather conditions.

Staples are convenient due to their small size and are less invasive than nails or screws. They’re often used when attaching lightweight or thin boards, such as pickets, to wooden frames. Staples provide a secure hold and can easily be applied using a staple gun or a hammer. However, it’s important to ensure that the staples are properly driven into the wood to prevent them from popping out over time.

Screws are another common choice for attaching fence boards, especially when dealing with metal frames or posts. They’re ideal for tasks such as attaching gate hinges and latches, attaching pickets to a metal frame, or attaching rails to metal posts. Screws provide a strong and sturdy hold and are less likely to loosen over time compared to nails. They’re also easier to remove if necessary.

When selecting screws for your fence project, it’s important to choose ones that are designed for outdoor use, as they’ll be exposed to various weather conditions.

Overall, the choice of fasteners for attaching fence boards depends on factors such as the type of fence, the materials being used, and personal preference. Whether you opt for nails, staples, or screws, it’s essential to choose high-quality fasteners that are specifically designed for outdoor use to ensure a long-lasting and secure fence.

Overview of Different Types of Fences and Their Construction Methods

When it comes to fencing, there are various options available, each with it’s own construction method. One popular type is the dog ear fence, which features vertical boards with a notched top resembling the shape of a dog’s ear. Hanging dog ear fence boards involves a step-by-step process to ensure a sturdy and visually appealing fence.

Before starting, it’s essential to gather the necessary tools, such as a tape measure, level, circular saw, drill, screws, and a post hole digger. The first step involves planning and preparation, including measuring the area, obtaining permits if required, and marking the boundary lines.

Next, the fence posts need to be installed. This can be done by digging holes at regular intervals along the boundary line and setting the posts securely in concrete. Once the posts are set, horizontal rails are attached to provide structural support.

After the framework is complete, it’s time to hang the dog ear fence boards. These boards are nailed to the horizontal rails, starting from one corner and moving along the fence line. It’s important to ensure the boards are level, with equal spacing between them for a uniform look.

As you progress, double-check that the boards are securely attached and level. If needed, use a circular saw to trim any excess length. Finally, finish off the fence by adding any additional features, such as a gate or decorative accents.

Remember that proper maintenance is crucial for the longevity of your dog ear fence. Regular inspections, repairs, and staining or painting can help protect the wood and keep your fence looking it’s best.

By following this step-by-step guide, you can successfully hang dog ear fence boards and create a functional and visually appealing fence for your property.


By following the step-by-step guide provided, individuals can ensure that each board is securely attached and properly aligned, resulting in a sturdy and aesthetically pleasing fence. The process involves careful planning, precise measurements, and the use of appropriate tools and materials. Additionally, maintaining regular maintenance and repairs can help prolong the lifespan of the fence, providing a safe and secure barrier for years to come.

Scroll to Top