How to Install a Fence Next to Another Fence: Step-by-Step Guide

When it comes to installing a new fence next to an existing one, the goal is to get as close as possible to the existing structure. However, it's important to note that this may not always be possible or practical due to various factors. One such factor is the corners of the fence, which may present limitations in terms of spacing. In such cases, it becomes necessary to build the new fence a bit farther back from the property line to avoid any interference with the existing fence piers. By following a step-by-step guide, you can ensure a seamless and effective installation process while maintaining the integrity of both fences.

Can You Put Fence Panels on Both Sides?

Yes, it’s possible to install fence panels on both sides of a fence to achieve a double-sided privacy fence. This can be a great solution if you aren’t satisfied with the appearance of the inside of the fence and want a uniform look from both sides. By installing fence panels on both sides, you ensure that both you and your neighbors are pleased with the finished result.

To begin the installation process, start by measuring the length of the area where you want to install the fence. Ensure that you’ve all the necessary materials and tools, including fence panels, fence posts, concrete mix, screws, and a post hole digger.

Next, dig holes for the fence posts on both sides of the existing fence. The holes should be at least 2 feet deep and approximately 6-8 feet apart depending on the size of the panels. Make sure the holes are straight and aligned properly.

Once the holes are ready, place the fence posts into each hole and secure them with concrete mix. Ensure that the posts are straight and level before the concrete dries. This is crucial for the stability and durability of your double-sided fence.

After the posts have set, it’s time to attach the fence panels. To do this, simply position the panels between the posts and use screws to secure them. Start from one end and work your way to the other, ensuring that each panel is properly aligned. Make sure to leave a small gap between each panel for expansion during temperature changes.

Make any necessary adjustments, such as tightening screws or trimming excess material, to achieve the desired result. Additionally, consider applying a protective coat of paint or stain to enhance the longevity and aesthetic appeal of your fence.

By following these step-by-step instructions, you can create a visually appealing and evenly finished fence that will enhance your privacy and bring a sense of beauty to your surroundings.

When it comes to building a fence next to another fence, there are some important considerations to keep in mind. If the fence isn’t intended as a boundary fence, it’s generally recommended to construct it at least two feet inside your property line. This ensures that you aren’t encroaching on your neighbor’s property. Two feasible options for building near a neighbor’s existing fence are to place the new fence adjacent to the current one or leave some space between them to allow for maintenance activities like mowing.

Can You Put Up a Fence Next to Another Fence?

When it comes to installing a fence next to another existing fence, there are a few things to consider. While it’s generally recommended to build a fence at least two feet inside your property line if it’s not a boundary fence, there are exceptions when it comes to building near your neighbors fence.

One option is to place the new fence right up against the existing one. This can provide added stability and act as a visual extension of the neighbors fence. By aligning the fences, you can create a seamless appearance and eliminate any gaps or awkward spacing between the two.

Alternatively, you may choose to leave a small gap between the fences. This allows for easier access between the properties and ensures that your neighbor can mow or maintain their side of the fence without any hindrance. Be sure to consult with your neighbor and reach a mutual agreement on the appropriate distance to leave between the fences.

Before installing the new fence, it’s essential to check with your local authorities or homeowners association regarding any regulations or guidelines that need to be followed. Some areas may have specific setback requirements or height restrictions that need to be adhered to. By obtaining the necessary permits and following any regulations, you can ensure a smooth and compliant installation process.

To install the fence, start by measuring and marking the desired area where the new fence will be placed. Use a string line or chalk to create a straight guideline. Dig post holes at appropriate intervals and depths, considering the type of fence you’re installing. Set the posts securely in concrete to ensure stability and durability. Install the fence panels or boards according to the manufacturers instructions, ensuring they’re level and securely attached.

Remember to communicate and maintain a positive relationship with your neighbor throughout the process. Discussing your plans, addressing any concerns, and reaching a joint decision can help prevent any potential conflicts or misunderstandings. By following these steps and exercising proper communication and consideration, you can successfully install a fence next to another fence while maintaining a harmonious neighborhood atmosphere.

How to Handle Disagreements With Your Neighbor About Fence Placement

  • Discuss the issue calmly and politely with your neighbor.
  • Listen to their perspective and try to understand their concerns.
  • Share your own concerns and provide any evidence or documentation supporting your proposed fence placement.
  • Suggest seeking mediation or involving a neutral third party to help reach a resolution.
  • Be open to compromise and finding a solution that works for both parties.
  • Consult your local building codes and regulations to ensure compliance with any legal requirements.
  • If necessary, consult with a professional surveyor to determine the exact property boundaries.
  • Consider engaging in alternative dispute resolution methods, such as arbitration or negotiation.
  • Document all communication and attempts to resolve the issue for future reference.
  • If all else fails, seek legal advice and consider taking the matter to small claims court or other appropriate legal channels.

Can I Hang Things on My Side of My Neighbours Fence?

When it comes to hanging things on your neighbors fence, the rule of thumb is that you can only do so if the fence is exactly on the property line.

It’s important to maintain a respectful relationship with your neighbor, whether or not you’re on good terms. Discussing any concerns or requests regarding the fence directly with them can lead to better understanding and resolution. Remember that open and honest communication is key to maintaining good neighborly relations.

In summary, it’s crucial to establish the ownership status of the fence before considering hanging anything on it. Building your own fence may be an alternative solution in this situation.

One common problem with wooden fences is the presence of gaps between the slats, which can compromise privacy and allow unwanted intrusions. However, there are several creative solutions to fill these gaps and enhance the appearance of your fence.

How Do You Fill a Gap Between Two Fences?

When it comes to installing a fence next to another fence, it’s important to pay attention to the small details and fill any gaps that may be present. One common issue that arises when two fences are installed side by side is the gap that forms between them. This gap can be unsightly and can also provide an easy escape route for pets or unwanted intruders. Fortunately, there are several ways to fill this gap and ensure that your fences provide maximum coverage and security.

One method to fill the gap between two fences is to shift the existing boards and add newer slats. This involves carefully maneuvering the existing boards to create a seamless transition between the two fences.

Another option is to cover the fence gaps with vinyl woven straps. These straps can be easily attached to the existing fences, creating a secure and attractive barrier. The vinyl material is durable and can withstand various weather conditions, ensuring that your fences remain functional and appealing.

For a more natural and green solution, consider filling the gaps with creeping vines or flowers. These plants can be trained to grow along the fences, covering any gaps and providing a beautiful backdrop. Not only does this method fill the gaps, but it also adds a touch of nature and beauty to your outdoor space.

Hang colorful banners, wind chimes, or even artwork on the fences to create a unique and interesting look. These decorations not only fill the gaps but also add personality and charm to your outdoor space.

An innovative solution to fill the gap between two fences is to hang shelves. These shelves can be used to store potted plants, small decorations, or other items. By utilizing the vertical space, you can create a functional and visually appealing display while covering the gaps.

Lastly, if the gaps are closer to the ground, you can use stones to fill them. Stack stones or small boulders along the bottom of the fences, ensuring that there are no spaces for anything to pass through.

Whether you choose to shift boards, use vinyl woven straps, plant creeping vines, line the fences with hedges, add decorations, hang shelves, or use stones, the key is to find a solution that suits your preferences and provides the necessary coverage and security for your property.

Using Hedges or Shrubs to Line the Fences and Eliminate the Gap

One way to install a fence next to another fence is by using hedges or shrubs to line the fences. This can help eliminate the gap between the two fences, providing a seamless and visually appealing boundary. To do this, you’ll need to select suitable hedge or shrub plants that are compatible with the existing fences in terms of height and growth habits. Before planting, ensure that you’ve enough space between the fences to accommodate the growth of the plants. Dig holes along the fence line and plant the hedges or shrubs, making sure to space them evenly. Regular pruning and maintenance will be required to keep the plants in shape and prevent them from overgrowing the fences. By utilizing hedges or shrubs, you can create a cohesive barrier that adds beauty and privacy to your property.


In conclusion, when installing a fence next to another fence, it’s crucial to consider the proximity and potential compatibility issues between the two structures. While the ideal approach is to stagger the new fence to maximize space and avoid interference, there may be instances, such as corners, where this isn’t feasible.

Please watch this video on YouTube:

Scroll to Top