How to Make a Cone Out of Wire Fence – Step-by-Step Guide

If you're looking for a practical and cost-effective way to create a cone out of wire fence, you’ve come to the right place. With a step-by-step guide, you can easily craft a cone that’s both sturdy and functional. Whether you’re a DIY enthusiast or simply looking to add a unique touch to your surroundings, this guide will walk you through the process, ensuring that you achieve the desired result.

What Shape Paper Do You Use to Make a Cone?

When it comes to making a cone out of wire fence, using the right shape is crucial. To begin, you’d typically start with a semicircle to form the cone shape. However, if you want to achieve more accuracy, starting with a circle is recommended. This method allows you to cut a wedge out of the circle, resulting in a precise cone.

This can be easily obtained at your local hardware store. Once you’ve your wire fence, lay it out on a flat surface and determine the desired dimensions for your cone.

Next, take a circular template, such as a plate or bowl, and place it on the wire fence. Trace the outline of the template onto the wire fence with a marker or chalk. This will be the base of your cone.

After tracing the circle, take a ruler and measure the radius of the circle. This measurement will determine the length of the wedge you need to cut out. Mark the center of the circle and draw a straight line from the center to the edge, creating a wedge shape.

Using wire cutters or pliers, carefully cut along the marked line to remove the wedge from the circle. Take caution to ensure a smooth and precise cut. This will serve as the opening for your cone.

Now that youve cut the wedge, carefully bring the edges of the remaining wire fence together to form the cone shape. Overlap the edges and secure them with wire or zip ties, making sure they’re firmly connected.

Finally, trim any excess wire from the top and bottom of the cone to ensure a clean finish. Your wire fence cone is now complete and ready for use.

Tips for Shaping Cones From Other Materials, Such as Paper or Fabric

  • Choose a sturdy material for your cone, such as thick paper or stiff fabric.
  • Draw a large circle on the selected material.
  • Cut out the circle using a sharp pair of scissors.
  • Fold the circle in half to create a semi-circle shape.
  • Take one end of the semi-circle and bring it to the opposite end, forming a cone shape.
  • Secure the edges of the cone together using tape, glue, or stitching.
  • Trim any excess material from the top or bottom of the cone for a clean finish.
  • If using fabric, you can add a lining or reinforce the cone with interfacing for added stability.
  • Experiment with different sizes and shapes by varying the size of the circle or the angle at which you fold the cone.
  • Decorate your cones with paint, markers, stickers, or other embellishments to enhance their appearance.
  • Consider using cones made from alternative materials for unique crafts or decorative purposes.

Now that you’ve your chicken wire cone ready, it’s time to bring your outdoor Christmas tree to life. In this next section, we will walk you through the steps of decorating the tree and adding festive lights, creating a stunning centerpiece for your holiday decorations. So let’s get started and bring that holiday cheer to your outdoor space!

How to Build an Outdoor Christmas Tree With a Chicken Wire Cone?

If youre looking to add a unique twist to your outdoor Christmas decor this year, why not consider building a chicken wire cone to create a stunning Christmas tree? The process is relatively simple and can be accomplished with just a few materials and steps.

To begin, youll need to cut a square of chicken wire. It’s important to wear gloves during this step, as the edges of the wire can be sharp and cause injury. Once you’ve your square of chicken wire, you can begin to shape it into a cone. This can be done by carefully wrapping the wire around itself, ensuring that it’s secure and stable.

Next, youll want to attach the cone together to ensure it maintains it’s shape. This can be done by wrapping additional wire around the areas where the wire overlaps. This will create a sturdy and solid cone structure for your tree.

To add extra stability to your chicken wire tree, youll want to cut a dowel and attach it to the base of the cone. This can be done by inserting the dowel into the ground and securing it with wire. This will keep your tree upright and prevent it from toppling over in windy conditions.

Once your cone is complete, you can add some festive flair by spray painting the dowels. This will add a pop of color and help your tree stand out in your outdoor space. Finally, you can attach a tag or label to the tree, adding a personal touch to your creation.

By following these simple steps, youll be able to create a stunning and unique Christmas tree that’s sure to impress your friends and neighbors. So grab your gloves, gather your materials, and get ready to bring some festive joy to your outdoor space!

Once the stretcher bars and pullers are in place, slowly tighten the pullers to bring the broken fence back together. Adjust and straighten the wire as needed, ensuring it’s tightly secured to both sides of the fence. Trim any excess wire and use fence staples to secure it further. Finally, inspect the repaired section for any remaining weak spots and reinforce them if necessary.

How Do You Fix a Broken Woven Wire Fence?

To fix a broken woven wire fence with extensive damage, you’ll need to splice a piece of matching woven wire to one side of the damaged fence. Start by carefully cutting the damaged wire near the break, making sure to leave enough wire on both sides to work with. Take a piece of new wire that matches the existing fence and align it with the cut ends.

To attach the new piece of wire, use fence repair sleeves or wire clips. Feed the wire through the sleeves or clips and tightly secure them to the existing wire and the new piece. This will ensure a strong and durable connection. Make sure to use enough sleeves or clips to provide a solid support for the splice.

Next, attach a stretcher bar to the new piece of wire on one side of the break. This will help keep tension on the fence and prevent it from sagging. Use fence clips or staples to secure the stretcher bar to the fence. Repeat this step for the other side of the break by attaching a second stretcher bar to the existing fence.

Place one puller on each side of the break, making sure they’re securely fastened. The pullers will help tighten the fence and keep it in place, preventing future damage.

Once you’ve completed these steps, carefully inspect the repaired section of the fence to ensure it’s securely attached and properly tensioned. If any adjustments are needed, use the stretcher bar pullers to fine-tune the tension.

Attach stretcher bars to both sides of the splice and secure them with fence clips or staples. With these steps, you can effectively repair a broken woven wire fence and restore it’s functionality.

Source: Different Wires Require Different Repair Tactics

When it comes to tensioning welded wire fences, the amount of tension you can achieve is limited compared to woven wire meshes. Woven wire fences like field fence, horse fence, and deer and wildlife fence can be tightened more effectively. However, if you’re working on a grade and need some guidance, you might find the video “Fence Stretching Basics” to be quite helpful.

Can You Tension Welded Wire Fence?

Yes, it’s possible to tension welded wire fence, but the amount of tension that can be applied is limited compared to woven wire meshes like field fence, horse fence, and deer and wildlife fence. Welded wire fencing material is generally not as flexible as woven wire, which means it can’t be tightened as much.

If you’re working on a sloped or uneven terrain, it’s crucial to take into account the grade of the land. In such cases, it’s advisable to refer to helpful videos or guides on fence stretching basics. These resources can provide valuable insights on how to properly tension a fence on uneven ground, ensuring that it’s securely installed and properly aligned.

By following a step-by-step guide, you can learn how to make a cone out of wire fence. This creative technique can be quite useful in various situations, such as creating a decorative garden feature or even making functional items like a chicken coop or a small animal enclosure. The process involves shaping the wire fence into a cone, ensuring that it’s tight and secure, and securing the ends together to form a stable structure.

One creative and festive way to make a Christmas tree is by using a Styrofoam cone as the base. This unique approach allows for endless possibilities when it comes to decorating your tree. With just a few simple steps, you can transform a plain Styrofoam cone into a beautiful and personalized holiday centerpiece. So let’s dive in and discover how to create your very own Styrofoam Christmas tree!

How Do You Make a Christmas Tree Out of a Styrofoam Cone?

To make a Christmas tree out of a Styrofoam cone, you’ll need a few supplies and a little creativity. The first step is to spray paint clay pots, which will serve as the base for the tree. This will add a touch of color and make the tree more visually appealing. Once the clay pots are dry, you can move on to prepping the fabric.

To prep the fabric, you’ll need to cut it into long strips or squares. This will depend on the look you want to achieve. Some people prefer strips of fabric, while others prefer squares. Whichever you choose, make sure the fabric is cut to the desired length and width.

Next, you’ll need to attach the fabric to the Styrofoam cone. This can be done using hot glue or a similar adhesive. Start at the top of the cone and work your way down, wrapping the fabric around the cone in a spiral pattern. Make sure to overlap the fabric slightly as you go to create a seamless look.

Once the fabric is attached to the cone, it’s time to connect the cone to the base. This can be done using a dowel or any other sturdy object that can be inserted into the clay pots. Insert the dowel into the bottom of the cone and then into the clay pots, making sure it’s secure and stable.

Finally, you can add any additional decorations or embellishments to the tree. This can include ornaments, lights, garlands, and more. Get creative and have fun with it! Once you’re satisfied with the look of your Styrofoam Christmas tree, you can place it in your desired location and enjoy the festive atmosphere it creates.

Creating a Tree Topper for the Styrofoam Tree

  • Gather materials needed for the tree topper
  • Pick out a Styrofoam cone in the desired size
  • Choose a festive fabric to wrap the cone
  • Cut the fabric into a large square
  • Place the cone upside down on the fabric square
  • Bring the corners of the fabric up and secure them at the top of the cone
  • Trim any excess fabric
  • Adorn the tree topper with ribbons, bows, or other decorative elements
  • Attach a string or wire loop to the top for easy placement on the tree
  • Place the tree topper on the highest branch of your Styrofoam tree


By following the step-by-step guide outlined above, one can easily transform a flat panel of wire mesh into a versatile cone shape suitable for various purposes. Whether you intend to use it for gardening, crafting, or as a protective barrier, this DIY project offers flexibility and accessibility. By utilizing simple tools, such as pliers and wire cutters, and employing basic bending and shaping techniques, you can quickly fashion a sturdy and durable wire fence cone. So, get creative and unleash your ingenuity by incorporating this technique into your projects, enhancing your endeavors with a functional and visually appealing cone structure.

Scroll to Top