How to Put Up a Hog Wire Fence: A Step-by-Step Guide

Putting up a hog wire fence is a valuable skill that can enhance the security and appearance of your property. In this step-by-step guide, we will walk you through the process of setting up a hog wire fence, from planning and gathering the necessary materials to installing and maintaining the fence. By following these instructions, you can ensure a sturdy and durable fence that will serve it’s purpose for years to come.

How Much Does Hog Wire Cost Per Foot?

Hog wire fences are a popular choice for homeowners looking to secure their property or contain livestock. They’re durable, versatile, and relatively affordable. When considering the cost of hog wire per foot, it’s important to factor in various elements that can impact the overall expense.

To get an accurate estimate for your specific project, it’s recommended to contact local contractors or suppliers who can provide you with quotes based on your requirements. They’ll take into account factors such as fence height, gauge, and any additional features to give you a more accurate cost per foot.

Factors That Can Impact the Cost of Hog Wire Per Foot, Such as Fence Height, Gauge, and Additional Features

  • Fence height
  • Gauge
  • Additional features

They securely hold the cattle panel in place, allowing for a sturdy and long-lasting fence. The process is simple and efficient, saving you time and effort in your fencing project.

How Do You Attach Hog Panels to Wood Posts?

To attach hog panels to wood posts, you’ll need to follow a few simple steps. First, lift your cattle panel about two inches off the ground, ensuring that it maintains a level position. This will allow for easy attachment to the wood posts.

One effective method for attaching the wire to the wood post is by using a Cats Claw Fastener. This innovative Fence Fastening System includes steel claws and screws, which make building and fixing fencing a breeze. The Cats Claw Fasteners are designed to securely hold the wires in place, preventing them from sagging or becoming loose over time.

Begin by positioning the Cats Claw Fastener on the wood post, ensuring that it aligns with the desired location of the cattle panel. Once in position, use a screwdriver to drive the screws into the post, securing the fastener firmly in place. Repeat this process for each wood post along the fence line, ensuring that the cattle panel is properly secured at regular intervals.

It’s crucial to maintain proper tension in the hog panels during the attachment process. This can be achieved by regularly checking the wires tension and using additional fasteners as necessary. This will prevent any sagging or gaps in the fence, ensuring that your livestock remains securely contained within the designated area.

Tips for Maintaining Proper Tension in Hog Panels

  • Regularly inspect the hog panels for any signs of damage or wear.
  • Ensure that the panels are securely anchored to prevent any shifting or sagging.
  • Use appropriate tensioning tools, such as tension bars or clips, to maintain the desired level of tightness.
  • Regularly tighten or adjust the tension on the panels as necessary.
  • Consider using tension wire for added stability and to ensure proper tension.
  • Properly stretch the panels during installation to prevent future sagging or loosening.
  • Avoid over-tightening the panels, as this can lead to unnecessary stress and potential damage.
  • Keep vegetation trimmed away from the panels to prevent any added weight or pressure.
  • Make sure the fence posts are securely installed and properly spaced to support the tension of the hog panels.
  • Invest in high-quality hog panels that are designed to withstand tension and provide long-lasting durability.

Watch this video on YouTube:

Proper post spacing is essential when it comes to installing a hog wire fence. The distance between posts depends on the type of wire you choose, with recommendations ranging from 12 to 20 feet. Additionally, the spacing between line wires on a woven wire fence can vary, with options of 3, 6, or 12 inches. Graduated spacing from bottom to top can also be considered. Taking these factors into account will ensure a sturdy and effective hog wire fence for your specific needs.

How Far Apart Should Posts Be for Hog Wire Fence?

When it comes to putting up a hog wire fence, post spacing is a crucial factor to consider. The distance between posts will largely depend on the purpose of the fence and the type of wire you choose. For hog applications, it’s generally recommended to space the posts 12 to 20 feet apart. This spacing ensures that the fence remains sturdy and effective in keeping hogs contained.

Additionally, the spacing between the line wires on your woven wire fence should be considered. You can choose to have a spacing of 3 inches, 6 inches, or 12 inches between the line wires. The choice of spacing will depend on your specific needs and preferences. Graduated spacing from bottom to top can also be implemented, providing further reinforcement to the fence.

If the posts are too far apart, the fence may sag or become weak, making it easier for hogs to escape or for predators to enter. On the other hand, spacing the posts too close together can result in unnecessary costs and a more time-consuming installation process.

If the terrain is uneven or hilly, you may need to adjust the spacing to ensure a consistent and secure fence line. Similarly, taller fences or ones made with heavier wire may require closer post spacing for added support.

The Importance of Selecting the Appropriate Type and Gauge of Wire for a Hog Wire Fence

Selecting the appropriate type and gauge of wire is crucial when installing a hog wire fence. The type of wire you choose should be specifically designed for livestock containment to ensure durability and proper functioning of the fence. Hog wire fencing typically requires a strong and sturdy wire gauge to withstand the weight and pressure exerted by large animals. By carefully considering the type and gauge of wire, you can ensure that your hog wire fence is reliable, secure, and capable of effectively containing your livestock.

Creating secure and effective fencing for pigs is essential, especially considering their natural instinct to root. To prevent escapes and ensure pigs remain contained, it’s important to abide by certain wire spacing guidelines. Starting at a low height of 6 inches from the ground, the fence wires should be closely spaced at even intervals up to the height of the pig’s nose. It’s recommended to have a minimum of 3 strands of wire and a fence height of at least 24 inches. These measures will help to properly contain pigs and maintain their safety and well-being.

What Is the Wire Spacing for Pigs?

When it comes to putting up a hog wire fence, one of the most crucial factors to consider is the wire spacing for pigs. Pigs are notorious rooters, and this behavior calls for careful placement of the fence wires. To prevent your furry friends from escaping, it’s recommended that the lowest fence wire starts no more than 6 inches from the ground.

Strategies for Reinforcing a Hog Wire Fence to Withstand Pig Rooting Behavior

  • Install additional horizontal wires
  • Double up the vertical wire strands
  • Add wooden or metal posts for extra support
  • Attach mesh or chain-link fencing to the hog wire
  • Bury the bottom of the fence at least 12 inches underground
  • Use concrete footers for gate posts
  • Regularly inspect and repair any damaged sections
  • Apply a coating of protective paint or sealant
  • Consider electric fencing as a deterrent
  • Use heavy-duty hog rings to secure connections
  • Trim vegetation around the perimeter to reduce temptation
  • Implement rotational grazing to minimize stress on the fence

When it comes to choosing the right type of wood for a hog wire fence, cedar is often the top choice. This is primarily because cedar is naturally resistant to bugs and rot, making it a durable and long-lasting option. One important factor in creating hog wire fence panels is incorporating Dado’s into each board. These grooves securely hold the hog wire, allowing for easy construction of picture frame-like panels.

What Kind of Wood Do You Use for a Hog Wire Fence?

When it comes to building a hog wire fence, choosing the right kind of wood is crucial for it’s longevity. One of the most popular choices is cedar wood. Cedar isn’t only aesthetically pleasing but also naturally resistant to bugs and rot. This means that your fence will be able to withstand the test of time and the harsh outdoor elements without any issues.

The key to creating sturdy and durable hog wire fence panels lies in the dados running into each of the boards. These grooves or channels are specially designed to hold the hog wire snugly in place. This ensures that the wire doesn’t sag or come loose over time, providing maximum security for your property.

To construct the panels, you’ll need to measure and cut the cedar boards to your desired lengths. Make sure to consider the height and width you want for your fence before making any cuts. Once you’ve your boards ready, use a dado blade on your table saw to create the necessary grooves.

Once the dados have been made, it’s time to assemble the panels. Lay out the cedar boards on a flat surface, ensuring that the grooves align perfectly. Then, carefully slide the hog wire into the dados, making sure it fits snugly within the channels. You can use staples or screws to secure the wire in place if desired. Once all the panels are assembled, you can start framing them together to form the complete hog wire fence.

Remember to treat the cedar wood with a protective sealant or stain to further enhance it’s durability and resistance to the elements. Regular maintenance, such as periodic resealing or staining, will help prolong the life of your hog wire fence and keep it looking great for years to come.

Different Styles and Designs of Hog Wire Fences, Including Variations in Panel Height and Spacing.

  • Standard panel height with uniform spacing
  • Taller panels with wider spacing at the top
  • Shorter panels with tighter spacing throughout
  • Alternating panel heights for a more decorative look
  • Varying wire gauges for different levels of durability
  • Metallic finishes, such as black or bronze, for a sleek appearance
  • Rustic or weathered finishes for a more traditional aesthetic
  • Adding wooden or metal posts and rails for a distinct style
  • Curved or arched top panels for a decorative touch
  • Customizable designs with intricate patterns or motifs

Watch this video on YouTube:

When it comes to ensuring the confinement and safety of cattle, hogs, and other large animals, choosing the right wire gauge is crucial. One option that stands out is the 9 gauge low carbon wire, known for it’s durability and strength. Boasting a remarkable stretch capacity of 13% and a breaking point of 1,200 lbs, this wire is ideal for managing and corralling large animal herds effectively. Notably, it’s the very wire used in the esteemed King Ranch #949-12-9 wire, further attesting to it’s reliability.

What Gauge Wire Do I Need for a Hog Fence?

When it comes to putting up a hog wire fence, choosing the right gauge wire is crucial. You want a wire that’s strong enough to withstand the demands of corralling large animal herds, such as cattle and hogs. One of the most reliable options is a 9 gauge low carbon wire.

This 9 gauge wire is designed to stretch up to 13% without breaking and has a breaking strength of 1,200 lbs. It’s the same wire that’s commonly used in King Ranch #949-12-9 wire, which is known for it’s durability and reliability.

This wire is specifically designed to handle the pressure and force that large animals can exert, ensuring that your fence stays intact and keeps your animals where they need to be.

The 9 gauge wire is a popular choice among farmers and ranchers due to it’s strength and ability to withstand the demands of large animal herds. By choosing this wire, you can be confident that your fence will be able to stand up to the challenges it may face.

How to Install a Hog Wire Fence

  • Measure and mark the desired length and height of your hog wire fence.
  • Dig holes for the fence posts at regular intervals along the marked line.
  • Insert the fence posts into the holes and secure them with concrete.
  • Attach metal brackets to the fence posts at the desired height.
  • Unroll the hog wire and attach it to the brackets using screws or wire ties.
  • Stretch the wire taut between each post and secure it with staples or nails.
  • Trim any excess wire and ensure the fence is sturdy and secure.
  • Optional: Paint or stain the fence to enhance it’s appearance and protect it from the elements.
  • Regularly inspect the fence for damage and make repairs as needed to maintain it’s integrity.
  • Consider adding a gate or access point for convenient entry and exit.


Remember to prioritize safety precautions, such as wearing protective gear and checking local regulations. Take the time to plan and execute this project with care, and enjoy the many benefits that a hog wire fence can offer.

Scroll to Top