How to Reset Dogtra Electric Fence Collar

The Dogtra Electric Fence Collar is a reliable and effective tool for keeping your furry friend safely contained within your property. However, there may come a time when you need to reset the collar, whether it's due to a malfunction, a change in settings, or a replacement battery. Resetting the Dogtra Electric Fence Collar is a relatively simple process that can be done in just a few steps. So whether you're a new dog owner or a seasoned pro, keep reading to discover how to reset your Dogtra Electric Fence Collar and keep your beloved pet safe and secure.

How Do You Reset a Dog’s Shock Collar?

To reset a Dogtra electric fence collar, it’s important to ensure that the collar is powered on. Begin by pressing and holding the button on the collar until a beep is heard and the light flashes green, indicating that the collar is turned on. Once the collar is powered on, proceed with the reset process.

It’s important to maintain the button pressed for the entire duration to ensure a successful reset.

As you continue to hold the power button, you may notice the collar light display various colors or patterns. This is normal and indicates that the reset process is taking place. After the 10-second mark has been reached, release the power button and wait for a few moments.

This indicates that the collar has been reset and is now ready to be used again. It’s important to note that following the reset process, you may need to reprogram any desired settings or adjust the sensitivity levels as needed for your specific use case.

Troubleshooting Common Issues With Dog Shock Collars

There are several common issues that may occur with dog shock collars, but most can be easily troubleshooted. Here are a few common issues and their potential solutions:

1. Collar not turning on or responding: Make sure the batteries are properly installed and fully charged. Check if there’s a reset button on the collar and try resetting it. If the problem persists, contact the manufacturer for further assistance.

2. Incorrect correction levels: Ensure that you’ve set the correct correction level for your dog’s size and temperament. Refer to the instruction manual to adjust the settings properly.

3. Poor contact between collar probes and dog’s skin: Check if the collar is properly fitted and the probes make direct contact with the dog’s skin. Loose or dirty probes can disrupt the effectiveness of the collar. Clean the probes and adjust the collar for a snug fit.

4. Inconsistent range: If the range of the collar seems limited, consider factors like obstructions or interference that may hinder the signal transmission. Test the collar in open areas away from any potential interferences.

Remember, it’s essential to read and follow the manufacturer’s instructions when troubleshooting any issues with your dog shock collar. If problems persist, consult a professional dog trainer or contact the manufacturer for further guidance.

To reset a PetSafe wireless collar, simply press and hold the button on the collar until a beep is heard and the light flashes green, indicating that the collar is now turned on. However, if you wish to reset the collar completely, press and hold the power button for about 10 seconds. This action will cause the light to turn red and the collar will power off.

How Do You Reset a Petsafe Wireless Collar?

To reset a PetSafe wireless collar, follow these simple steps. First, press and hold the button on the collar until you hear a beep and see the light flashing green. This will turn on the collar and indicate that it’s functioning properly.

If you need to reset the collar, press and hold the power button for about 10 seconds. You’ll notice that the light on the collar turns red, indicating that it’s being reset. At this point, the collar will turn off. This reset process allows you to start fresh and ensure that any previous settings or issues are cleared.

Once the collar is reset, you can proceed to set it up according to your specific needs. This may include adjusting the sensitivity levels, setting the boundaries, or programming any additional features that the collar may have. It’s important to familiarize yourself with the user manual and follow the manufacturers instructions to ensure proper setup and usage.

Refer to the user manual for instructions on how to pair the collar with the corresponding transmitter or base station.

Lastly, remember to regularly check the battery life of the collar and replace it if necessary. This will help maintain the effectiveness of the collar and ensure the safety of your pet. It’s also recommended to periodically clean the collar to prevent any debris or dirt from affecting it’s performance. By taking these steps, you can keep your PetSafe wireless collar in optimal condition and effectively manage your pets boundaries.

Instructions for Replacing the Battery on a PetSafe Wireless Collar

  • Turn off the PetSafe wireless collar.
  • Locate the battery compartment on the back of the collar.
  • Use a small screwdriver to remove the screw securing the battery compartment cover.
  • Take out the old battery and properly dispose of it.
  • Insert a new battery into the compartment, making sure it’s correctly positioned.
  • Replace the battery compartment cover and secure it with the screw.
  • Turn on the PetSafe wireless collar to test if the new battery is working properly.
  • If the collar is still not functioning, double-check the battery placement and try again.
  • Dispose of used batteries according to local regulations.

Source: How to reconnect your SMART DOGĀ® Trainer to the … – PetSafe

Additionally, check the collar’s batteries to ensure they’re still functional. If the batteries are old or low, they may not be providing enough power for the collar to deliver a shock. If the collar is fitted correctly and the batteries are fine, there may be an issue with the collar itself. In this case, it’s recommended to contact the manufacturer or a professional to diagnose and resolve the problem.

Why Is My Invisible Fence Collar Not Shocking?

If your invisible fence collar isn’t shocking, there could be a few reasons why it isn’t activating at the boundary. One common issue might be that the collar isn’t fitted properly to your pets neck. It’s important to ensure that the collar is snug enough to slide only one finger between a correction post and your pets skin. If the collar is too loose, it may not make proper contact with your pets neck, resulting in a lack of activation.

Another possible reason could be a low battery. Check the battery status of your pets collar and replace it if necessary. It’s recommended to replace the batteries every three to six months to ensure optimal performance. Additionally, make sure that the battery is properly inserted into the collar and securely fastened.

In some cases, the issue may lie with the boundary wires. Check for any breaks or damage in the wire that could be preventing the collar from receiving the signal. If you notice any issues with the wire, it may need to be repaired or replaced.

Additionally, check the settings on the transmitter unit. Make sure that the correction level is properly set for your pets size and temperament. If the correction level is too low, it may not be strong enough to activate the collar. Conversely, if the correction level is too high, it could be overly sensitive and not activating properly.

If you’ve checked all of these possible issues and the collar is still not shocking, it may be a more significant problem. In this case, it’s best to contact the manufacturer or a professional to troubleshoot and repair the issue. Trying to fix it yourself could potentially cause further damage or void any warranties.

It’s important to note that even electronic collars, commonly used for electric fences, aren’t immune to malfunctions. These malfunctions can range from the collar failing to administer any shocks to delivering nonstop shocks to the dog. In some cases, the constant exposure to electric shocks can lead to fear or aggression, as dogs may associate the shocks with innocent individuals, such as kids on bikes, the mail carrier, or the dog next door.

Can Electric Fence Collars Malfunction?

Electric fence collars, like any electronic devices, can indeed malfunction. These malfunctions can manifest in various ways, including situations where the collar fails to administer any shocks at all or when it continuously delivers shocks without reason. Such malfunctions can pose serious risks to both the dog wearing the collar and those around them.

On the other hand, when the collar delivers shocks continuously, it can cause undue distress to the dog and create an environment of fear and aggression. This can happen if the collars circuitry malfunctions, leading to an unending stimulation that’s both unpleasant and confusing for the dog. In such cases, it’s crucial to take immediate action to reset the collar and rectify the malfunction.

It’s worth noting that dogs living with electric fences may develop fear or aggression towards innocent individuals such as children riding bicycles, mail carriers, or even other neighboring dogs. This is because they associate the shocks they receive with the presence of these individuals, mistakenly believing them to be the source of the discomfort. It’s essential for dog owners to address any behavioral issues that may arise from the use of electric fence collars and ensure the well-being of both their pets and those around them.

Resetting a malfunctioning dog collar often involves following specific instructions provided by the manufacturer. It may include removing the batteries, leaving them out for a certain period, and then reinserting them to reset the device. In more complex cases, professional assistance may be necessary.

How to Identify if a Dog Collar Is Malfunctioning

  • Check for excessive wear and tear on the collar
  • Inspect the buckle and make sure it latches securely
  • Ensure the D-ring is securely attached and not loose
  • Test the collar’s adjustment mechanism to ensure it holds in place
  • Check for any frayed or loose stitching on the collar
  • Make sure the collar fits properly and isn’t too tight or too loose
  • Inspect any electronic components, such as shock or GPS collars, for any signs of damage or malfunction
  • Test any special features, such as remote controls or vibration modes, to ensure they’re working correctly
  • Observe your dog’s behavior when wearing the collar to see if they exhibit any discomfort or unusual reactions

If you’re experiencing issues with your Dogtra collar not holding a charge, there could be a few reasons behind it. One possibility is that the batteries haven’t been charged properly, so it’s worth double-checking the charging process. Additionally, it’s important to inspect the charger, splitter, and charging port for any potential issues. If you suspect that the charger or splitter isn’t functioning correctly, don’t hesitate to reach out to Dogtra’s Customer Service for further assistance. You can contact them via email at [email protected] or by calling (888) 811-9111.

Why Is My Dogtra Collar Not Holding a Charge?

One possible reason why your Dogtra collar isn’t holding a charge is that the batteries may not be charged properly. It’s important to ensure that you’re using the correct charger for your specific collar model and that the batteries are properly inserted into the collar. Make sure that the charger is securely plugged into a power source and that the collar is connected to the charging port correctly.

In addition to checking the batteries and charger, it’s also important to inspect the splitter and the charging port on the collar itself. Sometimes, the issue might be with the connection between the splitter and the collar or a faulty charging port. Inspect these components for any signs of damage or wear and tear. If you suspect that the charger, splitter, or charging port isn’t functioning properly, it’s recommended to contact Customer Service for assistance.

Dogtra Customer Service can be reached at [email protected] or (888) 811-91They’ll be able to provide guidance on how to troubleshoot the charging issue and determine if any replacement parts are needed. It’s always beneficial to reach out to the manufacturer directly to ensure you’re following the correct troubleshooting steps and to obtain any necessary replacement parts.

Remember to always follow the manufacturers instructions for charging and maintaining your electric fence collar to ensure it’s optimal performance.


By following the manufacturer's guidelines and considering the specific model of the collar, pet owners can successfully reset the collar and address any issues or malfunctions.

Scroll to Top