How to Wire Fence for Wildlife Crossings

In an era where human encroachments on natural habitats have greatly diminished wildlife corridors, it becomes imperative for us to find ways to coexist harmoniously with the remarkable creatures that once roamed freely. One such solution lies in understanding the art of wire fencing for wildlife crossings, a technique that allows animals to traverse these man-made barriers without compromising their safety or hindering their natural movements. The key lies in meticulous planning and execution, ensuring that the top wire or rail is thoughtfully positioned low enough for adult animals to effortlessly jump over, measuring preferably 40 inches or less but never exceeding 42 inches in height. Equally significant is the spacing between the top two wires, which shouldn’t be less than 12 inches apart to prevent the unfortunate tangling of deer and elk's back legs. By implementing these measures, we embark on a path to preserve the sanctity of wildlife habitats while fostering mutual respect between humans and the breathtaking fauna that share our planet.

What Is a Wildlife Fence?

A wildlife fence is a crucial component of the conservation efforts employed to facilitate safe wildlife crossings. Typically, a standard three or four-wire wildlife-friendly fence is erected with the intention of effectively containing livestock while simultaneously permitting the passage of wildlife.

The top wire is strategically positioned no higher than 42 inches, allowing wildlife to effortlessly leap over the barrier. This specific height is vital as it enables larger animals, such as deer, to navigate the fence without being impeded. In addition, the top wire is typically left unobstructed to further facilitate wildlife jumping over it smoothly.

Another integral part of the wildlife-friendly fence is the smooth bottom wire, which is installed approximately 16 inches above the ground level. This meticulous placement ensures that smaller animals, including rabbits or rodents, can easily pass beneath the fence without any hindrance or risk of injury. The absence of sharp edges or protruding elements in this bottom wire guarantees a safe crossing for wildlife, ultimately enhancing their ability to move freely.

To maximize the effectiveness of the wildlife fence, it’s crucial to consider the specific needs of the local wildlife population. Conducting thorough research and collaborating with experts in the field allow for the implementation of appropriate techniques and modifications.

Wildlife Fence Installation Techniques and Best Practices: Provide Detailed Instructions and Tips on How to Properly Install a Wildlife Fence, Including Considerations for the Height, Materials Used, and Maintenance.

  • Start by surveying the area where the wildlife fence will be installed to determine the appropriate height and location.
  • Clear the area of any vegetation or debris that could interfere with the installation process.
  • Choose the appropriate materials for the wildlife fence, taking into account the specific species you’re trying to keep out.
  • Dig post holes at regular intervals along the planned fence line, ensuring they’re deep enough to provide stability.
  • Insert the fence posts into the holes, making sure they’re secure and level.
  • Attach the fence panels or mesh to the posts, using the appropriate hardware for a secure installation.
  • Consider adding additional measures such as electric wires or deterrents to enhance the effectiveness of the wildlife fence.
  • Regularly inspect the fence for any damage or signs of wear and tear, and make necessary repairs to maintain it’s integrity.
  • Properly maintain the surrounding area by keeping vegetation trimmed and removing any potential access points for wildlife.
  • Periodically monitor the effectiveness of the wildlife fence and make adjustments as needed to ensure it’s continued functionality.

The multi-species fence is designed to accommodate the needs of various animals, making it the ideal choice for those who own multiple species. This fence provides optimal safety for horned animals like goats and sheep, as well as animals that may get their hooves caught, such as horses and alpacas. With it’s 4′ fixed knot woven wire and 3” vertical stays, this cost-effective and versatile option ensures reliable containment while minimizing the risk of injury.

What Is the Best Fence for Multiple Species?

When it comes to finding the best fence for multiple species, the multi-species fence stands out as the top choice. This fence isn’t only versatile but also cost-effective, making it a popular option among livestock owners. The key feature of the multi-species fence is it’s 4 fixed knot woven wire with 3″ vertical stays, which ensures optimal animal safety.

The 3″ vertical stays prevent the animals hooves from slipping through the fence, minimizing the chances of injury and ensuring their safety.

Whether you’ve different types of animals or a mixture of sizes, this fence can accommodate them all. It’s durability and strength are well-suited to withstand the pressure from larger animals, while also providing the necessary containment for smaller ones.

It’s fixed knot woven wire with 3″ vertical stays ensures animal safety, making it suitable for horned animals and those with hooves that might get caught.

Source: Livestock Fencing – River Valley Fencing

When it comes to wire fencing, the type you choose can determine whether or not deer will walk on it. If you opt for chicken wire, the thin and flexible wire may sink under the weight of the deer if they step on it. However, if you choose woven wire farm fencing with small holes, deer won’t be able to place their feet into the gaps and walk on it. It’s important to consider the distance between the fencing and your trees, as deer can lean over and nibble on branches if it’s too close. One alternative is to use concrete blocks and old farm gates to create a barrier.

Will Deer Walk on Wire Fencing?

When it comes to wire fencing for wildlife crossings, one question that often arises is whether deer will walk on it. The answer largely depends on the type of wire used. Chicken wire is made of thin, flexible, galvanized steel wire with hexagonal gaps, and if a deer were to step on it, it would sink.

To further prevent deer from accessing your trees, it’s important to place the wire fencing far enough away from the tree that a deer can’t lean over and nibble a branch. This can also be achieved by using concrete blocks or old farm gates to create a barrier around the tree, effectively protecting it from deer damage.

To get a wired fence in Animal Crossing: New Horizons, players can craft it using 4× hardwood and 2× iron nugget. The recipe for this item can be obtained from Nook Stop for 1,000 Nook Miles. Once acquired, the barbed-wire fence can be used as a tool to place fences down in the game.

How Do You Get a Wired Fence in Animal Crossing?

When it comes to creating wired fences, Animal Crossing: New Horizons offers a convenient solution. One of the fence items available in the game is the barbed-wire fence. This fence can be obtained by crafting it using 4× hardwood and 2× iron nugget. The recipe for this item can be obtained from Nook Stop in exchange for 1,000 Nook Miles.

To start the process of crafting the barbed-wire fence, players will need to gather the required materials. Hardwood can be obtained by hitting trees with an axe, while iron nuggets can be obtained by hitting rocks with a shovel or axe.

Once crafted, the barbed-wire fence can be used akin to a tool to place down a fence. This item can be particularly useful in creating designated areas within your island, preventing certain animals or villagers from entering or exiting specific areas. Additionally, it can add a touch of realism and aesthetics to your island, as the barbed-wire fence has a distinct appearance.

In order to place the barbed-wire fence, simply access your inventory and select the item. Then, move to the desired location on your island and press the A button to place it. This will create a wired fence in that spot. Players can continue to place more barbed-wire fences to create longer stretches of wired enclosures as they see fit.

Now that we understand the importance of using attractants or lures to bait a deer fence, let’s explore some effective strategies that can be employed. Rather than simply listing them, we will delve into each method, offering insights and practical tips for successful implementation. These techniques aim to entice deer to engage with the electrified fence, enhancing the aversive conditioning and ultimately achieving a higher level of success in deer deterrence.

How Do You Bait a Deer Fence?

Wiring a fence for wildlife crossings requires careful consideration, as it plays a vital role in ensuring the safe passage of animals while protecting habitats. However, to effectively encourage animals, such as deer, to interact with the fence, baiting techniques can be utilized.

One effective strategy involves attaching aluminum flags to an electrified wire, which acts as an attractant for deer. These flags are coated with a tempting substance like peanut butter. As deer are naturally attracted to new and unusual objects, the flags and the irresistible scent of peanut butter draw their attention.

It serves as a pivotal step in ensuring their safety during crossings.

When baiting a deer fence, it’s crucial to consider the appropriate locations for attaching flags and applying peanut butter. Selecting areas where animals are likely to approach the fence, such as existing wildlife corridors or natural pathways, ensures maximum effectiveness. Additionally, regular maintenance is essential to replenish the peanut butter and replace damaged flags, ensuring continuous allure and conditioning for the deer.

By combining the fence with attractants or lures like aluminum flags coated in peanut butter, wildlife crossings can be more successful.


By incorporating these guidelines, we can foster a harmonious coexistence between human infrastructure and wildlife, enabling the safe passage of animals in their natural habitats.

Scroll to Top