Keeping Your Glass Pool Fence Clean: Tips and Tricks

Keeping your glass pool fence clean might seem like a daunting task, but with a few simple tips and tricks, you can easily maintain it’s sparkling beauty. Just like washing dishes, gently apply the soapy water onto the glass, ensuring that you cover all areas. Once you’ve thoroughly cleaned the glass, rinse off the soap suds using a normal hose. To achieve a streak-free finish, you can either leave the glass to air dry or use a squeegee to remove any remaining water.

How Do You Clean a Glass Pool Fence With CLR?

Cleaning your glass pool fence is an essential part of maintaining it’s pristine appearance and ensuring it’s longevity. To get started, fill a bucket or container with a mixture of 1 part CLR to 1 part water. This solution will help break down any stubborn calcium or rust deposits that may have accumulated on the glass surface.

Once you’ve your solution ready, apply it onto the glass using a sponge or cloth. Make sure to cover the entire surface area of the fence. Allow the CLR solution to sit on the glass for approximately 2 minutes. This will give it enough time to penetrate and loosen any dirt, grime, or mineral deposits.

After the solution has had time to work it’s magic, it’s time to start scrubbing. Use a scrub brush or sponge to agitate the buildup on the glass. Scrub in circular motions, applying gentle pressure as needed. The goal is to remove any dirt or deposits without scratching the glass. Be sure to pay extra attention to areas with heavy buildup, such as near the waterline or in areas prone to splashing.

Once you’ve thoroughly scrubbed the glass, it’s time to rinse off the solution. Use clean water, either from a hose or a bucket, to rinse away the CLR solution. Make sure to rinse the glass from top to bottom to ensure a thorough cleaning.

Glass shards in a pool can be a cause for concern as they can remain floating in the water, making it difficult to remove them through regular cleaning methods. One effective solution is to drain the water using a sump pump, ensuring that none of the contaminated water enters the pool’s circulation system. However, it’s important to assess the water table and consider it’s impact before opting for this course of action.

What Happens When Glass Gets in a Pool?

Glass shards in a pool can be a serious safety concern. Even small pieces of glass can cause harm if they’re stepped on or come into contact with the skin. Therefore, it’s crucial to address the issue promptly and ensure the pool is safe for use.

One common issue when glass gets into a pool is that the shards can be small enough to remain floating in circulation, never making it to the bottom where vacuuming is typically done. This makes it difficult to remove the glass using normal cleaning methods, as the shards continue to pose a risk to swimmers.

To address this problem, one option is to drain the water from the pool. However, it’s important to use a sump pump instead of the main drain to prevent any water contaminated with glass from entering the pools circulation system. Before deciding to drain the water, it’s essential to assess the water table to determine if this option is feasible.

If draining the pool isn’t an option, there are other steps that can be taken to minimize the risk of injury. One approach is to use a skimmer net to remove as many visible glass shards as possible from the surface of the water. This can be a time-consuming process, but it helps to reduce the risk of swimmers coming into contact with the glass.

Additionally, installing a glass pool fence can serve as a preventative measure to keep glass out of the pool in the first place. Regularly inspecting and maintaining the fence is also important to ensure it’s effectiveness.

Pool owners should always prioritize safety and take immediate action if glass gets into their pool. Whether it involves draining the water or using other techniques to remove the glass, addressing the issue promptly is essential to create a safe swimming environment for everyone.

Tips for Preventing Glass From Entering the Pool in the First Place.

One of the most effective ways to keep your glass pool fence clean is by taking steps to prevent glass from entering the pool in the first place. Here are some tips and tricks to help you achieve this:

– Regularly inspect and maintain the glass panels, checking for any cracks or loose fittings. Replace or repair any damaged parts promptly to prevent shards of glass from falling into the pool.

– Ensure that the glass fence is professionally installed, with secure fittings and appropriate spacing between panels. This will minimize the risk of glass dislodging or breaking.

– Avoid placing any objects near the glass fence that could potentially cause it to crack or break, such as heavy furniture or equipment. Create a safe distance between the fence and any potential hazards.

– Educate children and other pool users about the importance of not leaning or applying pressure on the glass panels. Encourage safe behavior around the pool area to prevent accidents that could damage the fence and introduce glass fragments into the pool.

– Regularly clean the glass fence and surrounding area to remove any debris or dirt that could potentially lead to damage or a higher risk of glass breakage.

By following these preventative measures, you can help maintain the cleanliness and safety of your glass pool fence, ensuring a beautiful and functional addition to your pool area.


Regular maintenance and care won’t only enhance the overall beauty of your pool area, but also ensure the longevity and durability of your glass fence. So, keep these tips in mind and enjoy a crystal-clear view while lounging by your poolside oasis.

Scroll to Top